Basic Operation - Sharp LC-20SH6U Operation Manual

EZ SETUP Basic Operation
Turn on the power of the connected video equipment.
Press INPUT (V)/(A) to select the applicable input
source. The screen changes in order of INPUT1,
INPUT2, INPUT3 and TV mode each time INPUT is
pressed.
INPUT21
*
SWitching the Input Modes
(INPUT1/INPUT2IINPUT3lTV)
INPUT2 mode
INPUT1 mode
M~
(]E2S:)
ClQQ
\j~<:J
~I
o
AVMoDE
0
AUDIO ONLY
0
SLEEP
INPUT11
48DP
~
.~
~
POWER indicator
(POWER)
~STEREO
SAP
MONO
Turning On and Off the Main Power
• Press POWER. The POWER indicator instantly changes
from red to green and the LCD TV set is turned on.
On-screen display
2
~STEREO
SAP
MONO
Press ENTER to access START EZ SETUP mode.
Press AI"" to select "YES", and press ENTER.
I
NOTE
>
• If you want to stop the EZ SETUP process once it has
started, press MENU and it will be canceled. If you want to
set up again, please see CH-SETTING.
The tuner will automatically search for the broadcasting
and cable TV channels. (The channel number will
automatically increase when it appears.)
Once EZ SETUP is completed, the lowest channel
number memorized will be displayed.
~
~
CONNECT ANTENNA
OR CABLE.
cc
o •
BACKUGHT
O<De<D
PIC.FUP MENU RETURN MENU
00 • •
POWER
Press POWER, located on the upper side of the main
unit, to turn on the TV. The SELECT LANGUAGE mode
will be displayed.
Press
AI'''
to select "ENGLISH", "ESPANOL"
(Spanish) or "FRANQAIS" (French).
EZ SETUP during the First Power On
• When you turn on the TV for the first time, it will automati-
cally memorize the broadcasting channels.
Please perform the following instructions before you press
POWER.
(1) Insert the batteries into the remote control.
(2) Connect the antenna cable to the LCD TV set.
(3) Plug in the AC cord to the wall outlet.
Press ENTER to access CH-SETTING mode.
Press AI"" to select "ON" or "OFF". When you select
"ON", the LCD TV set will automatically memorize the
broadcasting channels.
I
NOTE
>
• Do not let the EZ SETUP screen remain unattended for a long
time.
• If EZ SETUP does not memorize all the channels in your region,
please see CH-SETTING for more information on manually
memorizing the channels using CH-SETTING.
• It may be diffic;ult to preset when the broadcasting signals are
weak, the channel cycle frequency is incorrect or the frequency
jamming is occurring around the area. Please see CH-SETTING
for more information on manually memorizing the channels using
CH-SETTING.
I NOTE
>
• The On-screen display disappears after a few seconds.
• To turn off the main power, press POWER again.
Standby
To turn off the LCD TV set
Press POWER. The POWER indicator will turn red.
To turn the LCD TV set back on
Press POWER again. The POWER indicator will turn green.
INPUT3 mode
INPUT'I
*
TV mode
I NOTE
>
INPUT1 :
Used for video equipment connected to the COMPONENT input
terminals.
INPUT2 :
Used for video equipment connected to the INPUT2 terminal.
The S-video input terminal is additionally provided for the
lNPUT2. If both the S-video terminal and normal video
terminals are connected with cables, the S-video input
terminal takes priority.
INPUT3 :
INPUT3 mode is used to adjust the preset settings and IN or OUT
can be selected. lNPUT3 indication is not displayed when OUT is
selected.