Getting Ready - Hunter 21711 Owners And Installation Manual

Type 2 models

Hide thumbs Also See for 21711:

Table of Contents

To install a ceiling fan, be sure you can do the following:

• Locate the ceiling joist or other suitable support in ceiling .

• Drill holes for and install wood screws .

• Identify and connect electrical wires .

• Lift 40 pounds .

If you need help installing the fan, your Hunter fan dealer can direct

you to a licensed installer or electrician .

Gathering the Tools

You will need the following tools for installing the fan:

• Electric drill with 9/64" bit

• Standard screwdriver (magnetic tip recommended)

• Phillips-head screwdriver (magnetic tip recommended)

• Wrench or pliers

• Ladder (height dependent upon installation site)

Checking Your Fan Parts

Carefully unpack your fan to avoid damage to the fan parts . Refer to

the included Parts Guide . Check for any shipping damage to the motor

or fan blades . If any parts are missing or damaged, contact your Hunter

dealer or call Hunter Technical Support Department at 888-830-1326

(In Canada, call 1-866-268-1936) .

1 • Getting Ready

45046-01 • 01/13/11 • Hunter Fan Company

Installing Multiple Fans?

If you are installing more than

one fan, keep the fan blades and

blade irons (if applicable) in sets,

as they were shipped .

Table of Contents