Basic Setup (All Models) - Bushnell Weather FX 5 Owner's Manual

Basic Setup (all models)

Once you have provided power to the unit and set your location,
you're done with the setup-that's all you need to do! Your
will start to display weather information for your area
WeatherFX
once it automatically connects to the network that relays the data
from AccuWeather.com. You will typically see most (or all) of your
area's weather information appear on the display within the first 15
minutes, however the time it takes for the display to show all of the
data on the larger models may take longer (up to a few hours after
it is first powered on), and can vary depending on your location, so
please be patient.
After it receives the first full set of all data, your will
WeatherFX
continuously display weather information-updating temperature,
forecast and other data automatically as it becomes available. If
you seem to be having trouble receiving weather data, check the
Signal Strength Indicator bars to the right of "ambient" in the top
right corner of the display. If your unit only shows one bar, move it
closer to a window or try placing the unit in a higher level of your
home or building if possible. Two or more bars of signal strength
will ensure your stays up to date, and will improve
WeatherFX
battery life, since it doesn't have to "work as hard" to receive the
network signal.
2