I Don’t See Any Bars Next To The Signal Strength Indicator; The Time On My Clock Is Off By One Or More Hours; My Clock’s Time Is Correct, But It Still Shows An Incorrect Or Outdated Forecast - Bushnell Weather FX 5 Owner's Manual

Troubleshooting Guide and FAQ
Q: I don't see any bars next to the signal strength indicator.
A: This means that your
reception. Try moving your unit closer to a window or upstairs.
If your
WeatherFX
http://map.myambient.com to verify that your location receives
signal coverage.
Q: The time on my clock is off by one or more hours.
A: Press the TIMEZONE button on the back of the device until the
proper time appears. Your
time from the network without further adjustments.
Q: My clock's time is correct, but it still shows an incorrect or
outdated forecast.
A: This is almost always the result of "lagging," a condition that
occurs when your device is not receiving a consistently strong signal.
If you notice this happening, try changing the location where you
keep the
WeatherFX
where it shows at least two bars of signal strength.
16
WeatherFX
still doesn't get any bars of signal, go to
WeatherFX
. We recommend that you keep it somewhere
is in an area with poor
should maintain accurate