Dell PowerConnect 7048P Manual page 1039

5 Specify the IP address that the virtual router function will use.
console(config-if-vlan10)#vrrp 10 ip 192.168.10.1
6 Configure an optional description to help identify the VRRP group.
console(config-if-vlan10)#vrrp 10 description
master
7 Assign a virtual router ID to the VLAN routing interface for the second
VRRP group.
console(config-if-vlan10)#vrrp 20
8 Specify the IP address that the virtual router function will use.
The router is the virtual IP address owner of this address, so the priority
value is 255 by default.
console(config-if-vlan10)#vrrp 20 ip 192.168.10.2
9 Configure an optional description to help identify the VRRP group.
console(config-if-vlan10)#vrrp 20 description
backup
10 Enable the VRRP groups on the interface.
console(config-if-vlan10)#ip vrrp 10 mode
console(config-if-vlan10)#ip vrrp 20 mode
console(config-if-vlan10)#exit
console(config)#exit
Configuring VRRP
1039