D-Link DGS-3100-48 User Manual page 243

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
ID SEVERITY
Information
SYSLG8.49.9 al
Information
SYSLG8.5.168 al
Information
SYSLG8.5.169 al
Information
SYSLG8.5.170 al
Information
SYSLG8.5.171 al
Information
SYSLG8.50.18 al
Information
SYSLG8.63.14 al
Information
SYSLG8.63.6 al
Information
SYSLG8.74.51
al
Information
SYSLG8.74.52 al
Information
SYSLG8.79.5 al
Information
SYSLG8.83.2 al
Information
SYSLG8.83.3 al
Information
SYSLG8.83.4 al
Information
SYSLG8.84.0 al
Information
SYSLG8.84.5 al
227
CATEGORY MESSAGE
sshpClientFind: illegal
AAA index %(1)d
MIB variable %(1)s not
console found in temporary DB
Unknown field name
SNMP %(1)s
Command Handler for
command ID %(1)s is
console missing
Command <%(1)s>
processed in %(2)d.%(3)d
console secs
Port changed status from
Interface notPresent to notPresent@
UNIT ID
Stack %(1)d,Msg:%(2)s
UNIT ID
Stack %(1)d,Trap:%(2)s
Interface %(1)s state
Interface
%(2)s
Virtual interface %(1)s
Interface area %(2)s state %(3)s
File Delete - file URL
Web %(1)s
Synchronization with unit
Stack %(1)d is failed @
Synchronization with unit
%(1)d is finished
Stack successfully @
Wrong source unit id
%(1)d, message discarted
Stack @
NTP Packet received from
IP UDP
Illegal data size
DESCRIPTION
The specified MIB variable
was not found in the
Mib2cli temporary DB.
The
SNMPServG_name_2_Id
function failed because
MIB variable name is
unknown.
The command handler for
the specified command ID
is missing.
It took the specified number
of seconds to process the
specified command.
An indication of not present
port when this port is
already not present is
wrong.
(Valid for stackable projects
only) See the relevant trap
message as in the case when
the specified stack member
operating in the standalone
mode issues it.
(Valid for stackable projects
only) See the relevant trap
message as in the case when
the specified stack member
operating in the standalone
mode issues it.
The file at the specified
URL has been deleted.
Synchronization with the
specified unit has failed.
Synchronization with the
specified unit has
succeeded.
The specified source unit
ID is incorrect, the message
is discarded.
The NTP packet is received
from the UDP.
The data size is too large.