–
Authenticated ports are added to the supplicant VLAN as untagged.
–
Authenticated ports remain unauthenticated VLAN and Guest VLAN members. Static VLAN
configuration is not applied to the port.
–
The following list of VLANs cannot participate in DVA: an Unauthenticated VLAN, a Dynamic
VLAN that was created by GVRP, a Voice VLAN, a Default VLAN and a Guest VLAN.
–
Network administrators can delete the supplicant VLAN while the supplicant is logged in.
The supplicant is authorized during the next re-authentication if this supplicant VLAN is
re-created or a new VLAN is configured on the RADIUS server.
•
Guest VLAN — Specifies whether the Guest VLAN is enabled on the interface.
•
Periodic Reauthentication — Reauthenticates the selected port periodically, when enabled.
The reauthentication period is defined in the Reauthentication Period (300-4294967295) field.
•
Reauthentication Period (300-4294967295) — Indicate the time span in which the selected port is
reauthenticated. The field value is in seconds. The field default is 3600 seconds.
•
Reauthenticate Now — Permits immediate port reauthentication, when selected.
•
Authentication Server Timeout (1-65535) — Defines the amount of time that lapses before the
device resends a request to the authentication server. The field value is in seconds. The field default is
30 seconds.
•
Resending EAP Identity Request (1-65535) — Defines the amount of time that lapses before EAP
request are resent. The field default is 30 seconds.
•
Quiet Period (0-65535) — The number of seconds that the device remains in the quiet state following
a failed authentication exchange. The possible field range is 0-65535. The field default is 60 seconds.
•
Supplicant Timeout (1-65535) — The amount of time that lapses before EAP requests are resent to
the user. The field value is in seconds. The field default is 30 seconds.
•
Max EAP Requests (1-10) — The total amount of EAP requests sent. If a response is not received after
the defined period, the authentication process is restarted. The field default is 2 retries.
Configuring Device Information
245