Defining Dhcp Ipv4 Interface Parameters - Dell PowerConnect 5424 User Manual

Defining DHCP IPv4 Interface Parameters

The DHCP IPv4 Interface page contains fields for specifying the DHCP clients on device interfaces.
Click System→ IP Addressing→ DHCP IPv4 Interface in the tree view. To open the DHCP IPv4
Interface page.
Figure 6-26. DHCP IPv4 Interface
• Interface — The specific interface on which the DHCP client is configured. Click the option button
next to Port, LAG, or VLAN and select the interface connected to the device.
• Host Name — The system name as it is defined on the DHCP server (up to 20 characters).
• Remove — When selected, removes DHCP clients.
Adding DHCP Clients
1 Open the DHCP IPv4 Interface page.
2 Click Add.
The Add DHCP IPv4 Interface page opens.
3 Complete the information on the page.
4 Click Apply Changes.
The DHCP Interface is added, and the device is updated.
Configuring System Information
113