Advertisement
Self-test is not normal.
To initiate the self-test for the RECEIPT part of the printer, follow these instructions:
1.
Make certain there is either a paper roll or a label roll inserted and loaded into the
printer before starting.
2.
Turn off the printer using the power button.
3.
Turn the printer on while keeping the RECEIPT FEED button depressed. The
self-test should now start and the information printed will give the status of the
printer.
4.
When the test print is complete, the following will be on the last line of print,
"Self-test printing, Please press RECEIPT FEED button." The RECEIPT OUT/
JOURNAL OUT LED's flash to indicate the standby condition.
5.
Press the RECEIPT FEED button to continue the self-test or switch the printer off
and then back on again to resume normal printing.
To initiate the self-test for the SLIP part of the printer, follow these instructions:
1.
Turn off the printer using the power button.
2.
Turn the printer on while keeping the JOURNAL/ SLIP FEED button depressed.
The SLIP LED should now be flashing. Insert a piece of paper into the slip
printing area then printing will commence and the information printed will give
the status of the printer.
3.
When printing is complete, the SLIP LED will be flashing. To continue the self-
test, insert more paper in the slip part of the printer or switch off and back on
again to resume normal printing.
Part 6.
The Self-Test.
Advertisement
