Lower Spray Arm; Upper Spray Arm - Kalamazoo Operating Instructions Manual

Care and maintenance instructions
3. Remove the small yellow drain pump access cover
at the left of the bottom drain (see illustration below).
4. By inserting your finger into the hole, you can turn
the pump blades to release anything blocking the
pump.
5. Reinstall the access cover and filters.
6. Plug the machine in again.
If the dishwasher still does not start and a whirring
sound is heard, the overflow protection has been
triggered.
• Shut off the water.
• Unplug the unit from the power outlet.
• Call the Customer Care Center.
NOTE!
Do not forget to reinstall the drain pump access cover.

Lower spray arm

Holes and bearings can sometimes become blocked.
1. Pull the lower spray arm straight up to release it.
2. Remove any debris using a needle, toothpick, or
some other similar pointed device. The spray arms
also have holes underneath.

Upper spray arm

1. Pull out the basket.
2. Unscrew the spray arm bearings as illustrated to
remove the spray arm from the upper basket.
3. Clean the upper spray arm in the same manner as
the lower spray arm.
4. Replace the spray arm and screw the spray arm
bearings firmly back into place.
Customer Care Center
1-800-898-1879
Spray arm bearings
23