Checking The Network Connection - Western Digital WDBABZ0010BBK-NESN User Manual

4. Press / to select the access point you want to connect to, then press OK.
Proceed to step 6 to continue Auto search.
5. Use the navigation buttons
point you want to connect to, select Submit, then press OK .
6. Use the navigation buttons
select Submit, then press OK.
7. Use the navigation buttons
automatically from the router) or Manual (input static IP address manually), then
press OK. If you selected Manual, follow steps 7-10 under "Ethernet Network
(Wired) Setup" on page 68. When finished, proceed to step 12 below.
8. Once the network is successfully set up, press OK to display the Home screen.
After establishing a network connection, you can:
Use the Internet services integrated into your media center to access
streaming media. Go to the next chapter for more information on these
services.
Transfer files between the media center and your computer (PC or Mac).
Procedures for copying and moving files between the media center and your
computer is described in "Step 3 - Loading Content On Your Media Center"
on page 18.

Checking the Network Connection

If you experience network problems, check the network connection to determine the
cause of the problem.
To check the network connection:
1. Press Setup or navigate to the Home | Setup menu bar.
2. Press / to select Network Settings, then press OK.
to type in the network name for the access
to key in the passcode for the access point,
to select Automatic (obtains IP address
WD TV Live Hub Media Center
User Manual
NETWORK SETUP – 72