Setup Navigation Buttons; Audio/Video Output - Western Digital WDBABZ0010BBK-NESN User Manual

Setup Navigation Buttons

Use these buttons on the remote control to navigate within and between the
Settings screens.
Button
Up/Down arrows
OK
1. Press OK. A confirmation prompt appears.
2. Select OK, then press OK.
If you fail to select OK within 15 seconds, the new
setting will not be applied.
If your entertainment unit cannot support the
selected setting, no change is made and the
original setting is retained.
Back

Audio/Video Output

Use the menus in this category to configure playback for audio and video files.
Video Output
Use this menu to select a video signal. After you finish making your selections, select
OK at the "Are you sure you want to change the video resolution?" prompt, then
press OK.
Composite
When using the standard RCA A/V cable (yellow, red, and white connectors) to
connect the media center, select Composite in the Video output screen.
WD TV Live Hub Media Center
Function
• Select a menu
• Select a menu setting in an option
screen
Displays the option screen for the
selected menu
Applies the selected menu setting
Displays the previous menu screen
SETUP AND ADVANCED FEATURES – 174
User Manual