Taking Still Pictures
Taking Pictures
The Optio E90 features a wide range of shooting modes and functions
to suit almost any subject or scene. This chapter describes how to take
pictures with the most commonly used standard settings (the initial
factory default settings).
Power switch
3
1
Press the power switch.
The camera turns on and is ready to take still pictures. In this manual,
this is called Still Picture Capture Mode.
2
Confirm the subject and shooting
information on the display.
The focus frame in the middle of the display
indicates the zone of automatic focusing.
When the camera detects a face, the Face
Detection function is activated and the face
detection frame appears (p.61).
You can change the captured area by
pressing the Zoom button to the left or right
(p.67).
T (Right)
W (Left)
56
enlarges the subject.
widens the area that is
captured by the camera.
Shutter release button
Zoom button
02/02/2010
02/02/2010
Focus frame
02/02/2010
02/02/2010
14:25
14:25
14:25
detection
Face
frame
38 38 38
14:25
14:25
14:25
38 38
38