HP Photosmart c500 User Manual page 15

Hp photosmart c500 digital camera user’s guide - chapter 3 - taking photos

Hide thumbs Also See for Photosmart c500:

Table of Contents

You can also change the flash settings using the camera menus.

To select a flash setting using the camera menus:

Turn the camera on and turn the camera mode dial to Rec.

2. Press the Menu button.

3. Use the 4-way arrow button to scroll to the Preferences menu, then scroll

down to Capture.

4. Press the Edit button (left soft key).

5. Scroll to Flash.

6. Use the 4-way arrow button to select a flash setting. See the table above for information about each of the flash

settings.

Note:

You cannot use the flash for Burst photos. If you choose a flash setting from the menu but you are

taking Burst photos, the setting will not be effective until you take your next Still or Timelapse photo.

7. Press the Exit button (right soft key) twice to save the settings and exit the menus.

Tip:

To conserve battery power, turn the color LCD off after you choose the setting.

HP PhotoSmart C500 Digital Camera User's Guide

Adjusting the Camera Settings

Table of Contents