Charging & Battery Time - Jabra BT200 - Headset - Over-the-ear User Manual

Attaching the charger cradle clip
The charging cradle can be fastened to your
belt or clothes using the supplied clip.
To attach the clip to the cradle follow these
simple instructions:
1. Locate the two slots on the charging
cradle as shown.
2. Position the clip with one end in the top
slot on the cradle.
3. Press the clip gently onto the charger
cradle until the other end fits into the
bottom slot securely.
4. You will hear a clicking sound when this
is correctly attached.
10
Charging & Battery Time
1
Before you can use your JABRA BT200 headset, you
need to carefully place the headset in the charging
cradle and fully charge the headset's self-contained
battery. See Figs 1 & 2 (Please note that the headset
can be ON or OFF while charging). A fully charged
battery provides up to 3 hours of talktime, and up to
100 hours of standby time. The JABRA BT200 battery
2
does not need to be completely used before
charging – you can re-charge the product at any
time. If the charger is left connected and charging –
it will not over charge the battery.
To charge the headset please follow this guide:
1. Insert the travel charger's electrical plug into an
2. Plug the mains travel charger connector into the
electrical outlet.
port on your charging cradle.
1
2
11