Seagate Savvio 10K Product Manual page 56

Table 17: Commands supported by Savvio SAS family drive (continued)
Command name
Verify (12)
Verify (16)
Verify (32)
Write (6)
Write (10)
DPO bit
FUA bit
Write (12)
Write (16)
Write (32)
Write and Verify (10)
DPO bit
Write and Verify (12)
Write and Verify (16)
Write and Verify (32)
Write Buffer (modes 0, 2, supported)
Firmware Download option
(modes 5, 7, Ah and Bh supported) [3]
Write Long (10)
Write Long (16)
Write Same (10)
PBdata
LBdata
Write Same (16)
Write Same (32)
XDRead
XDWrite
XPWrite
[1] Savvio drives can format to any multiple of four bytes per logical block in the range 512 to 528 bytes.
[2] Warning. Power loss during flash programming can result in firmware corruption. This usually makes the
drive inoperable.
[3] Reference Mode Sense command 1Ah for mode pages supported.
[4] Y = Yes. Command is supported.
N = No. Command is not supported.
A = Support is available on special request.
50
Command code Supported
AFh N
AFh N
7Fh/000Ah N
0Ah Y
2Ah Y
Y
Y
AAh N
8Ah N
7Fh/000Bh N
2Eh Y
Y
AEh N
8Eh N
7Fh/000Ch N
3Bh Y
Y
3Fh Y
9Fh/11h N
41h Y
N
N
93h N
7Fh/000Dh N
52h N
50h N
51h N
Savvio SAS Product Manual, Rev. D