EAW DC2 Specifications

FEATURES
• Dual 15-in woofers maximize LF output
• Horn-loaded 10-in cone mid frequency section with Radial
Phase Plug™
• Horn-loaded 1.4-in exit/3-in voice coil HF compression
driver
• Cutaway rear corner directs coverage down from a position
close to the ceiling
• High-output system designed to deliver the extreme level
requirements of high energy dance clubs
DESCRIPTION
The DC2 is engineered for use in permanent installations. The
system includes dual 15-in woofers in an optimally vented
enclosure, a horn-loaded 10-in midrange and a 1.4-in exit/3-
in voice coil high frequency compression driver on a 90° (h)
x 40° (v) dispersion constant directivity horn.
A complex asymmetrical internal passive crossover/filter net-
work provides MF/HF subsystem integration. An MX Series
Close Coupled Processor™ should integrate the LF and MF/HF
subsystems.
APPLICATION
The DC2 bi-amplified three-way dance club system provides
high output, high definition reinforcement for medium to
large sized clubs. Overall design is robust to ensure reliabili-
ty in the face of continuous peak output operation.
The DC2 is designed for overhead mounting in a horizontal
configuration to cover medium to large sized dance floors. It
is also very effective when used as a reinforcement system in
live music clubs. Its cutaway upper-rear corner allows it to
tuck up next to the ceiling while angling its coverage down
20°. The enclosure includes balance-optimized threaded
mounting points.
Like all EAW products, it can be special ordered in virtually
any color to match a specific décor. Six year warranty.
PERFORMANCE
Frequency Response
±3 dB 56 Hz to 18 kHz
-10 dB 45 Hz
Axial Sensitivity (dB SPL, 1 watt @ 1 m)
Passive MF/HF 108
LF 100
Nominal Input Impedance (ohms)
Passive MF/HF 6
LF 4
Power Handling (watts, continuous)
Passive MF/HF 350
LF 1600
One Main Street, Whitinsville, MA 01588
EAW products are continually improved. All specifications are therefore subject to change without notice.
Calculated Output Limit (dB SPL @ 1 m)
Nominal Beamwidth (degrees @ -6 dB SPL)
Dimensions
Weights
508 234 6158 Toll Free 800 992 5013
SPECIFICATIONS DC2
Passive MF/HF Peak 139
LF Peak 138
Passive MF/HF Long term 133
LF Long Term 132
Horizontal 90
Vertical 40
PHYSCIAL
Product Group Avalon
Configuration 3-way full-range
Powering Bi-amplified (passive MF/HF
LF Subsystem 2x 15-in woofers, vented
MF Subsystem 1x 10-in cone, horn-loaded
HF Subsystem 1.4-in exit/3-in voice coil com-
Enclosure Material Exterior-grade Baltic birch plywood
Finish Wear-resistant textured black paint
Connectors 2x Neutrik NL4 Speakon
Suspension Hardware 8x 3/8"-16 threaded mounting
Grille Zinc coated perforated steel
Height (front) 22.5
Height (rear) 19.3
Width 57.1
Depth 19.0
Net Weight 190
Shipping Weight 207
FAX 508 234 8251
DC2/2 pp
crossover)
pression driver on CD horn
points (4 top, 2 per side)
inches millimeters
572
489
1449
483
pounds kilograms
86.5
94.2
info@eaw.com www.eaw.com
October 2001 Printed in USA