Computer Setup (Continued)
Heading
Option
Standard
System Date
CMOS
System Time
Features
Floppy Drive A
SATA Port0
SATA Port1
SATA Port2
SATA Port3
SATA Port0/1 Working
Mode
Halt On
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Computer Setup (F10) Utility Guide
Description
Allows you to set system date.
Allows you to set system time.
Allows you to set Drive A to None or 1.44M,
3.5 inch.
For each, allows you to:
• detect HDD size and head on selected
channel
• set extended drive on selected channel to:
• None
• Auto
• set access mode on selected channel to:
• Large
• Auto
• view:
• Capacity
• Cylinder
• Head
• Precomp
• Landing Zone
• Sector
No SMART HDD installed.
Only SATA Port0/1 are available for
working mode change by chipset.
Legacy mode is for legacy OS support.
Allows you to set at:
• All Errors
• No Errors
• All but Keyboard
• All but Diskette
• All but Disk/Key
www.hp.com
Computer Setup (F10) Utility
5