Tv Setup And Stand Assembly - Vizio VO22LFHDTV10A User Manual

TV Setup and Stand Assembly

Note: We strongly recommend that two people perform the setup and assembly due to the weight and
size of the TV.
To unpack the TV and stand base:
1. Remove the contents from the box.
2. Remove the two foam end caps.
3. Remove the protective bag from the TV and stand.
4. Lay the TV face down on a clean, flat surface.
Note: Make sure that the surface is free of debris to prevent the TV screen from getting scratched.
To attach the TV stand base:
Note: If you will be wall mounting the TV, skip this step and go to the next page for wall mounting
instructions.
5. Place the base stand upright on a flat surface with the VIZIO logo facing forward.
6. Position the TV over the stand with the screen facing forward.
7. Press the clip holder on the bottom of the TV into the spring loaded clip in the stand base until
you hear it click into place.
8. Move the TV into an upright position.
Version 9/9/2008 7
www.VIZIO.com
VIZIO VO22L FHDTV10A User Manual