Tv Setup And Stand Assembly - Vizio VO420E User Manual

VIZIO VO370M/VO420E User Manual

TV Setup and Stand Assembly

Note: We strongly recommend that two people perform the setup and assembly due to the weight and
size of the TV.
To unpack the TV and stand base:
1. Remove the remote control, batteries, and power cord from the foam end caps.
2. Remove the two top foam end caps.
3. Remove the stand base under foam end cap.
4. Remove the TV from the box and lay it face down on a clean, flat surface.
Note: Make sure that the surface is free of debris to prevent the TV screen from getting scratched.
To attach the TV stand base:
1. Push the stand base onto the stand neck (already connected to TV).
2. On the bottom of the base, insert the thumb screw and tighten. Move the TV into an upright
position.
Bottom view
Stand Neck
(already attached
to TV)
Stand Base
8
www.VIZIO.com
Vizio TV
(back)