On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
Move where
Pops up
you want to
the menu
adjust
screen
1
Press the MENU Button, then the main menu of the OSD appears.
2
To access a control, use the
3
When the icon you want becomes highlighted, press the OK/AUTO Button.
4
Use the
5
Accept the changes by pressing the OK/AUTO Button.
6
Exit the OSD by pressing the MENU Button.
Move where
Select a
you want to
menu icon
adjust
Buttons to adjust the item to the desired level.
Select a
Adjust the status
menu icon
Buttons.
A17
Exit from
Save
the menu
adjustment
screen.