Connecting To External Devices; When Connecting To Your Pc - LG L246WP User Manual

Connecting to External Devices

When Connecting to your PC

1.
Place the monitor in a convenient, well-ventilated location near your computer.
To adjust height of your monitor, unlock the stand lock on top of the stand.
2.
Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection.
3.
Connect the power cord into a proper power outlet that is easily accessible and close
to the display.
COMPONENT
DC-OUT HDMI/DVI Y P B P R
Wall-outlet type
PC
4.
Press
5.
Press the INPUT button at the front side of the monitor.
INPUT
When connecting with a HDMI/DVI signal input cable.
A
• Select HDMI : HDMI/DVI digital signal.
B
When connecting with a D-Sub signal cable.
• Select RGB : D-Sub analogue signal.
Note
1
2
Varies according to model.
2
Power Cord
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin
high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row
connector.
button on the front switch panel to turn the power on.
OK/AUTO
How to connect to two computers.
Connect the signal cables (HDMI/DVI and D-Sub) to each computer.
Press the INPUT button at the front side of the monitor.
Directly connect to a grounded power outlet on the wall or
a power bar with a ground wire.
1 Signal Cable
A9
NOTE
This is a simplified representation
of the rear view.
This rear view represents a
general model; your display may
differ from the view as shown.
MAC
INPUT
RGB
HDMI
Component