Pioneer PRV-9000 Operating Instructions Manual page 122

The PRV-9000 has three recorder IDs available, Recorder1, Recorder2 and
Recorder 3. When set to Recorder2 or Recorder3, the remote control mode
appears on the front panel.
Note: Setting the ID on the recorder locks out the remote control until the remote's
ID is changed to match the recorder.
Follow the directions below to change the setting on the remote control.
1. Press and hold the RETURN button.
2. Press the number that corresponds to the recorder ID (1, 2 or 3).
3. Verify that the JOG MODE Indicator lights.
This indicator lights when the remote control ID is changed.
4. Confirm that the remote control number displayed on the front panel
matches the recorder ID.
Check this number if the remote fails to control the recorder.
If using a single recorder in a room, this function is unnecessary.
PRV-9000 Operating Instructions
114