Rewind 01H - Sony SDX-800V Product Specifications Manual

REWIND

6.24. REWIND 01h

Bit 7
Byte
0
1
2
3
4
5
REWIND tells the drive to position the media at the beginning of the currently active partition. Before rewinding, the
drive writes any buffered data to tape and appends an EOD marker.
Immed: When this bit is set, the drive writes any remaining buffered data followed by an EOD marker to tape. It then
returns status to the Host before beginning the actual rewind operation. If the Immediate bit is not set, status will be
returned after the rewind has completed.
SONY AIT-3Ex drive SDX-800V series Ver.1.1
6 5
Operation Code (01h)
Obsolete
4 3 2
Reserved
Reserved
Reserved
Reserved
Control
6.Command Specification
1 0
Immed
6-97