Connecting Your Computer - Bose Wireless Computer Speaker Owner's Manual

English TAB 2, 10

Connecting your computer

1. Make sure the wireless source light on the wireless
speaker is flashing.
If not, press the wireless source button on the
remote. The wireless source light should start
flashing.
2. Make sure your computer is on and all music applica-
tions are closed.
TAB 3, 11 TAB 4, 12
Wireless source light
Wireless
source
button
TAB 5, 13 TAB 6, 14
3. Lift the antenna on the USB key to the vertical posi-
tion and plug it into a USB port on your computer.
Confirm that the USB key power light turns on and
starts flashing.
Antenna
Power light
and
Disconnect-reconnect button
4. Wait a few seconds for your computer to recognize
the USB key. When ready, it will automatically
establish a wireless link with the wireless speaker.
This may take up to 20 seconds the first time, much
less after that.
TAB 7, 15 TAB 8, 16
S S
YSTEM ETUP
7