Wall Mounting the Monitor Panel
To mount the monitor panel to an existing wall mounting device or swing arm, purchase an HP
mounting accessory kit. Mounting devices can be purchased separately from HP. Visit
support
for ordering information.
CAUTION:
NOTE:
The monitor should be mounted to a Video Electronics Standards Association (VESA)
compliant mounting device.
1.
If the monitor is installed on the base, press the button on the front of the pedestal and lift the
monitor panel from the base.
Figure 3-10
2.
Carefully spread the hinge cover to release it, and then remove the cover.
Figure 3-11
ENWW
When handling the monitor, be careful to avoid scratching the screen.
Removing the Monitor Panel
Removing the Hinge Cover
2
1
1
www.hp.com/
Wall Mounting the Monitor Panel
15