Epson H6000IIP - TM Two-color Thermal Line User Manual page 65

uninstallation is performed. Specify in the command line as follows:
The way to specify depends on the installing version.
Silent Uninstallation of Version 1.xx
Example:
Silent Uninstallation of from Version 2.00 to 2.50 (including service pack
version)
Example:
When only /s is specified as the parameter, the currently installed program is
uninstalled. This parameter can only be used when only one version is currently
installed. If multiple versions are installed, an error message is displayed. When
multiple versions are installed, specify as follows.
Silent Uninstallation of Version 2.60
<Procedure>
(1) Make a recording file.
Make a file for recording the operation of uninstall. To uninstall the
EPSON OPOS ADK, perform the following commands.
(Example) "Full Path\Setup.exe" /r
When the uninstallation finished, the uninstall operation is recorded
to the "Setup.iss" file that is made in the Windows folder.
(2) Using the (1) recording file file for Silent Uninstall. Copy the (1)
recording file to the same folder as the "Setup.exe".
(Example) "Full Path\Setup.exe" /s
To specify the path of the recording file, use the "/f1" option.
(Example) "Full Path\Setup.exe" /s /f1"c:\Temp\Setup.iss
The functions are added to Silent Installation by adding the following parameters
to command lines.
The following parameters can be used at the same time. If you wish to use them
at once, input the parameter you want to use after the parameter added to the
command line.
Parameters do not distinguish capital and small letters. It is not necessary
specifying only with small letters as the following examples show.
<Indicating the Silent Uninstallation>
Adding Parameter: /s
"FullPath\Uninstaller.exe" /s"Version"
"FullPath\Uninstaller.exe" /s
60
User's Manual
Installer, SetupPOS, TMUSB
Version 2.65 Jul. 2009