Epson H6000IIP - TM Two-color Thermal Line User Manual page 115

Version 2.65 Jul. 2009
"WIR" : IEEE802.11b Port.
"Device Description" edit field
This edit field displays description of the device selected in the "Select Device
Name" combo box.
If the device comes with multiple types, then description of the selected port
appears.
"INF File Name." edit field
This edit field displays the INF file name of the device selected in the "Select
Device Name" combo box.
If the same device name has different INF files, then each is treated as a different
device.
(This happens when, for example, the same device exists in version 1.xx and
version 2.xx.)
[Browse] button
Use this button to open the file open common dialog box and select an INF file
from a folder other than the one specified.
If an invalid INF file is selected or if the INF file does not belong to the device
class of the selected device, then an error message appears and the selection
becomes not possible.
"Add New LDN" edit field
Enter a logical device name for the selected device.
The name can be up to 16 characters, but it cannot contain the "\" character.
In addition, the same logical device name cannot be used again in the same
device class.
If the logical device name is invalid, then the [Next] button appears dimmed and it
is impossible to proceed to the next step.
"CheckHealth Interactive" button
Use this button to call the CheckHealth method for the selected device using
Level = OPOS_CH_INTERACTIVE.
If the selected device is not HardTotals, then it is not displayed.
110
User's Manual
Installer, SetupPOS, TMUSB