Audio Interface; Power Interface - Teac DW-224E-V Hardware Specificftion

12. AUDIO INTERFACE

(1) LOUT
(2) ROUT
(3) AGND
For the electrical specification of the line output, refer to 5.2.

13. POWER INTERFACE

The following specifications apply to the interface connector terminals of the drive. The power should be
supplied from a power supply unit with reinforced insulation or double insulation.
(1) Allowable supply voltage range
(2) Allowable ripple voltage
(3) Current consumption
Standby/Sleep
Write 24x
Active
Random access (Duty 100%)
During starting/seek
During eject
Remarks:
1. The supply voltage should be 5V+5%.
2. For each of the sleep, standby, and active modes, refer to
SPECIFICATION".
3. Does not include pulse-like current below 1msec.
: Line output of the left channel (unbalanced)
: Line output of the right channel (unbalanced)
: Ground of audio line output.
: +5VDC ±5% (4.75 to 5.25V)
There should be no abnormal operations by DC +5V ±10%.
: 100mVp-p or less, 50 to 20MHz (including the spike noise)
: Refer to Table 13-1.
(Table 13-1) Current consumption
Mode Average current max (A)
0.025
1.0
0.9
1.2
– 11 –
Peak current max (A)
1.5
1.5
1.5
"15. POWER MANAGEMENT