Connection To Audio Equipment; Installing Drivers And The Writer Software; Installing Drivers With Windows 98Se/Me/2000/Xp; Installing Drivers With Windows Nt 4.0 And Os/2 - Teac DW-548DK User Manual

Dvd-rom/cd-r/cd-rw drive

Table of Contents

6. CONNECTION TO AUDIO EQUIPMENT

The TEAC DW-548D can output the LINE OUT audio signal through

the headphone jack via the Sound Card. Furthermore it is possible to

connect audio devices to the audio connector on the rear. At the back

side of the DW-548D the audio signal is also available in digital form.

7. INSTALLING DRIVERS AND THE WRITER

SOFTWARE

As a general precaution the installation of the hardware has to be car-

ried out as described before. The software installation starts with acti-

vating the reading functionality of the drive as this is well known with

any conventional CD-ROM drive. If the reading functionality is avail-

able the next installation step is to achieve the writing functionality pro-

vided of the writer software. More details according the installation of

your writer software you will find in its documention [Help].

According to the Plug-and-Play conventions the drive is recognized as

a standard CD-ROM drive first. To make this possible the drives hard-

ware installation must have been carried out correctly. After switching

on your computer, Windows 98SE/ME/2000/XP will install the neces-

sary driver automatically.

Caution:

Do not install any additional drivers with Windows 98SE/ME/2000/XP .

After installing the hardware, the reading functionality of the drive is

activated with installing the drivers shipped with the corresponding

operating system. The drivers may be configured and activated aided

by the system control. Please refer to the manual of your operating

system for any details.

Table of Contents