Advertisement
DIMENSIONAL DRAWINGS
DIMENSIONAL DRAWING
CABINET TO BE SYMMETRICAL ABOUT CENTERLINE DESIGNATIONS.
LS832
MOUNTING POINT 1/4-20 THREADED HOLE.
CENTER OF BALANCE.
L C
6.25
44.08
INPUT
7.00
2.12
FRONT
BACK
2.05
SERVICE ITEMS
LF: Complete Cone Driver
EAW Part No.
804082
HF: Complete Compression Driver/Tweeter
EAW Part No.
805015
Filter/Crossover Network
Complete Assembly: EAW Part No.
NOMINAL DATA
Frequency Response (1 Watt @ 1m)
3 dB
200 Hz to 20 kHz
-10 dB
100Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
Full Range
97
Impedance (Ohms)
Full Range
12
Power Handling, AES Standard (Watts)
Full Range
200
Calculated Maximum Output (dB SPL)
Full Range Peak
126.0
Full Range Long Term
120.0
Acoustic Performance Partnership
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email info@eaw.com
TECHNICAL SPECIFICATIONS LS832
6.00
3.25
L C
L C
1.12
3.25
TOP/BOTTOM
SIDES
510691 (D)
3
exp 8/24/98 shb
225396
Eastern Acoustic Works
ARCHITECTURAL SPECIFICATIONS
The two-way full range loudspeaker systems shall incorpo-
rate eight 4-in LF transducers and three 1-in soft dome tweeter
HF transducer.
All eleven drivers shall be mounted in a vertical column to
create a line source. The LF drivers shall be mounted four
each above and below the three HF drivers. An internal fre-
quency shading filter set shall maximize beneficial line source
coupling while minimizing grading lobes. An internal pas-
sive filter network shall provide fourth order acoustical cross-
over and system equalization between the low and high fre-
quency sections.
System frequency response shall vary no more than 3 dB
from 200 Hz to 20 kHz measured on axis. The system shall
produce a Sound Pressure Level (SPL) of 97 dB SPL on axis at
1 meter with a power input of 1 Watt, and shall be capable
of producing a peak output of 126.0 dB SPL on axis at 1
meter. The system shall handle 200 Watts of amplifier power
(AES Standard) and shall have a nominal impedance of 12
Ohms.
The loudspeaker enclosure shall be rectangular in shape with
a convex arc to the front baffle. It shall be constructed of
15mm thickness void-free cross-grain-laminated Baltic birch
plywood and shall employ extensive internal bracing. It shall
be finished in black catalyzed polyurethane. Input connec-
tors shall be two-terminal barrier strip. A total of 6x 1/4"-20
threaded mounting/suspension points (1 each top, bottom,
4 back) shall be provided. The front of the loudspeaker shall
be covered with a vinyl coated perforated steel grill.
The 2-way full range loudspeaker shall be the EAW model
LS832.
LS832
Advertisement
