Selecting A Flash Mode; Changing The Screen Display - Sony DSC W180 - Cyber-shot Digital Camera Instruction Manual

Selecting a flash mode

1
Press (Flash) on the control
button repeatedly to select the
desired mode t z.
: Flashes when there is insufficient light or
backlight.
: Flash always operates.
: Flash always operates. The shutter speed is slow in a dark place to clearly
shoot the background that is out of flash light. (Slow Synchro)
: Flash does not operate.
Note
You cannot use the flash during burst shooting.
•

Changing the screen display

1
Press DISP (screen display) on the
control button repeatedly to select
the desired mode.
Indicators on: Sets screen to standard
brightness and displays the information.
Indicators on*: Sets screen brighter and
displays the information.
Histogram on*: Sets screen brighter and displays a graph of the image brightness.
Indicators off*: Sets screen brighter and displays only images.
* The brightness of the LCD Backlight increases.
z
Histogram and brightness settings
A histogram is a graph showing the brightness of an image. The graph display indicates a bright
image when skewed to the right side, and a dark image when skewed to the left side.
If you view images in bright outside light, adjust the screen brightness up. However, the battery
•
power may decrease faster under such condition.
23
GB