Vga Card - Asus V2-P5G33 - V Series - 0 MB RAM Installation Manual

User manual
Table of Contents

Advertisement

4.
Digital audio connector (4-1 pin SPDIF_OUT for ASUS HDMI

VGA card)

This connector is for an additional Sony/Philips Digital Interface (S/
PDIF) port(s). If you are using an ASUS HDMI-equipped graphics card,
connect the HDMI card to this connector with a S/PDIF Out cable.
P5K-VM Digital audio connector
The ASUS HDMI-equipped graphics card and the S/PDIF Out cable are
purchased separately.
5.
USB connectors (10-1 pin USB78, USB 910, USB1112)
These connectors are for USB 2.0 ports. Connect the USB module
cable to any of these connectors, then install the module to a slot
opening at the back of the system chassis. These USB connectors
comply with USB 2.0 specification that supports up to 480 Mbps
connection speed.
P5K-VM USB 2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will
damage the motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector
(USB, blue) first, and then install the Q-Connector (USB) to the USB
connector onboard if your chassis supports front panel USB ports.
The USB module cable is purchased separately.
4-8
SPDIF_OUT
GND
SPDIFOUT
+5V
USB1112
USB910
pin1
pin1
Chapter 4: Motherboard info
USB78
pin1

Advertisement

Table of Contents
loading

This manual is also suitable for:

P5g33 v series

Table of Contents