Connecting The Power Cord - HP 8000f - Elite Ultra-slim Desktop PC Hardware Reference Manual
Hardware reference guide hp compaq 8000f elite ultra-slim desktop business pc
Hide thumbs
Also See for 8000f - Elite Ultra-slim Desktop PC:
- Maintenance and service manual (166 pages) ,
- Technical reference manual (114 pages) ,
- Quickspecs (26 pages)
Table of Contents
Advertisement
Connecting the Power Cord
When connecting the power supply, it is important to follow the steps below to ensure the power cord
does not pull free from the computer.
1.
Connect the round end of the power cord to the power supply connector on the rear of the computer
(1).
2.
Insert the power cord retainer clip into a slot on the air vent to prevent the cord from becoming
disconnected from the computer (2).
3.
Bundle any excess power cord with the supplied strap (3).
4.
Plug the female end of the other power cord into the power supply brick (4).
5.
Connect the other end of the power cord to an electrical outlet (5).
Figure 2-1
CAUTION:
becoming disconnected and loss of data.
8
Chapter 2 Hardware Upgrades
Connecting the Power Cord
Failure to secure the power cable with the retainer clip may result in the power cord
ENWW
Advertisement
Table of Contents
