Setting Up The Handset - Panasonic TG2620W Operating Instructions Manual

TG2620_2621_2622.book Page 11 Monday, December 26, 2005 1:48 PM
If you subscribe to a DSL service
Please attach a noise filter (contact your
DSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 25) do not
function properly.
For assistance, please visit http://www.panasonic.com/phonehelp

Setting up the handset

Connecting the charger
Available model:
KX-TG2622
L Use only the included Panasonic AC
(120 V AC, 60 Hz)
To single-line
telephone
jack (RJ11C)
Noise filter
adaptor PQLV19 or PQLV255.
Bottom of the charger
Hooks
Fasten the AC adaptor cord to prevent
it from being disconnected.
Preparation
11