DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
You can set the following set-up menu items.
• PICTURE SUB ADJ.
• H. POSITION
• V. POSITION
Notes:
● Parameters for PICTURE SUB ADJ., H. POSITION and V. POSITION can be set
separately depending on the signal (Input A (VIDEO), Input B (VIDEO), Input C or
Input D) selected with the input select buttons on the front panel.
Select the required video input with the input select buttons on the front panel in
advance.
● WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature
value.
Set COLOR TEMP. to 6500 or 9300 on the <MENU> screen beforehand.
● INPUT REMOTE is shown when REMOTE SYSTEM is set to MAKE.
1. While pressing the MENU button, press the
CHROMA/PHASE button.
CHROMA
MENU
The <SET-UP MENU> screen is displayed.
* The on-screen display goes off automatically after about five
minutes with operation performed.
PHASE
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select the desired menu item.
A selection mark (4) is put next to the selected item.
CHROMA
CONTRAST
Front panel
button
PHASE
BRIGHT
CHROMA/
PICTURE SUB ADJ.
PHASE
H. POSITION
CONTRAST/
V. POSITION
BRIGHT
WHITE BALANCE
CONTROL LOCK
STATUS DISPLAY
REMOTE SYSTEM
INPUT REMOTE
3. Press the VOLUME/SELECT buttons to set.
VOLUME/SELECT
Front panel
button
Notes:
● For WHITE BALANCE items, select the CUT OFF or DRIVE
setting screen, then select the function display for adjustment.
● Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
• WHITE BALANCE
• REMOTE SYSTEM
• CONTROL LOCK
• INPUT REMOTE
• STATUS DISPLAY
Function
displayed
Forward selection mark (
Reverse selection mark (
Function
displayed
+
Increase (to max. value)
VOLUME/
4
Forward the setting value
SELECT (+)
CUTO
Selects CUT OFF setting screen
–
Decrease (to min. value)
VOLUME/
SELECT (–)
1
Reverse the setting value
DRV
Selects DRIVE setting screen
1
2
Contents
4
)
4
)
Contents
<SET-UP MENU> screen
<SET-UP MENU>
4
PICTURE SUB ADJ.
H. POSITION
:
00
V. POSITION
:
00
WHITE BALANCE
CONTROL LOCK
: OFF
STATUS DISPLAY
: ON
REMOTE SYSTEM
: MAKE
INPUT REMOTE
: A – D
EXIT
CHROMA
CONTRAST
VOLUME/SELECT
MENU
PHASE
BRIGHT
<Front panel buttons>
1
Selection mark (4): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (5 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
Forward the menu item.
Reverse the menu item.
–
Lower the adjustment
value. (to the minimum)
+
Raise the adjustment
value. (to the maximum)
4
Forward the setting value.
1
Reverse the setting value.
Exit the <MENU>
EXIT
screen.
DRV
Selects DRIVE adjustment.
Selects CUT OFF
CUTO
adjustment.
Adjusts red and blue
RB
signal level.
Adjusts red, green and
RGB
blue signal level.
Turns the ON-SCREEN
display on or off. (This
DISP
function is effective only
in the DRIVE or CUT OFF
adjustment mode.)
3
4
13