Installing The System Board; Removing The Coin-Cell Battery - Dell Vostro 3460 Owner's Manual

Installing the System Board

1. Align the system board to the port connectors and place the system board in the computer.
2. Tighten the screws to secure the system board to the chassis.
3. Connect the speaker cable to the system board.
4. Connect the power-connector cable to the system board.
5. Install the:
a) WLAN card
b) heat-sink fan
c) palmrest
d) keyboard
e) hard drive
f) optical drive
g) memory
h) base cover
i) battery
6. Follow the procedures in

Removing the Coin-Cell Battery

1. Follow the procedures in
2. Remove the:
a) battery
b) base cover
c) memory
d) optical drive
e) hard drive
f) keyboard
g) palmrest
h) ExpressCard reader(if available)
i) WLAN card
34
After Working Inside Your Computer .
Before Working Inside Your Computer