ViewSonic Pro9000 User Manual page 41

- If the projector is still not projecting the whole image, you will also
need to change the monitor display you are using. Refer to the
following steps.
1. Select the "Change" under the "Monitor" tab.
2. Click on "Show all devices". Next, select "Standard monitor types"
under the SP box; choose the resolution mode you need under
the "Models" box.
3. Verify that the resolution setting of the monitor display is lower
than or equal to 1080p.
If you are using a Notebook:
y
- First, follow the steps above to adjust resolution of the computer.
- Press the toggle output settings. example: [Fn]+[F4]
Notebook Brand
Acer
Asus
Dell
Gateway
IBM/Lenovo
HP/Compaq
NEC
Toshiba
Mac Apple
If you experience difficulty changing resolutions or your monitor freezes,
y
restart all equipment including the projector.
The screen of the Notebook or PowerBook computer is not displaying
your presentation
Some Notebook PCs may deactivate their own screens when a second display
device is in use. Each has a different way to be reactivated. Refer to your com-
puter's documentation for detailed information.
Image is unstable or flickering
` Adjust the "Phase" to correct it. Refer to the "VIDEO/AUDIO | Computer
Mode" section for more information.
` Change the monitor color setting from your computer.
Function Keys
[Fn]+[F5]
[Fn]+[F8]
[Fn]+[F8]
[Fn]+[F4]
[Fn]+[F7]
[Fn]+[F4]
[Fn]+[F3]
[Fn]+[F5]
System Preference -> Display ->
Arrangement -> Mirror display
40