ViewSonic Pro9000 User Manual page 13

15. Menu
Call out the OSD Main menu, back to the previous OSD step, or exit the OSD
menu.
16. Exit
Exit current OSD page or exit OSD menu.
17. Four Directional Select Keys
Press up, down, left, right direction buttons to select items or make adjustments.
18. Enter
Activate or confirm the selected OSD function.
19. Memory keys
Press the respective button to save the shown and desired OSD function as a
memory hot key.
20. Default
Reset all settings to factory default. For more detail information, see "Factory
Default" on page 34.
21. User 1
Call out the User1 color mode setting.
22. User 2
Call out the User2 color mode setting.
23. Overscan
Adjust overscan level. This function is only available in Video signal.
24. Magnify
Zoom in and out the image.
25. Lock (Keypad lock)
Lock the keypad function in Projector control panel, excluding the Power key.
26. RGBCMY
Enter the setting page of color management.
27. Color Temp
Select the color temperature.
28. Gamma
Select the Gamma applied.
29. Freeze
Press to freeze the image. Press it again to un-freeze the image.
30. Blank
Press to blank the image. Press it again to go back to normal image.
31. Pattern
Display test patterns.
32. Color Mode
Select the presets optimized for various types of images.
33. Sleep timer
Set the countdown timer interval. The projector will automatically power off when
the countdown has finished.
34. Information (i)
Display the projector information.
12