Recording (Vcr); Recording A Tv Program - Toshiba SD-V295KU Owner's Manual

Recording (VCR)

Recording a TV program

Recording a TV program
Preparation:
• Connect the AUDIO (L/R)/VIDEO IN jacks on the rear
panel (LINE IN 1) to the AUDIO (L/R)/VIDEO OUT
jacks of the Cable/Satellite box.
• Turn ON the TV and select to the corresponding
video input.
• Press VCR DVD selector to select the VCR mode. (The
VCR mode indicator will light.)
1
Load a cassette tape with the erase prevention
tab intact.
2
Press SP/SLP to select the desired tape speed
SP or SLP.
3
Press INPUT SELECT to select "LINE1" input
position.
4
Select the channel you wish to record on your
cable/satellite box.
5
Press REC/OTR.
26
2K10101A.indb 26 2K10101A.indb 26
14
The DVD/VCR will automatically turn
on.
The tape counter and "SP" or "SLP"
will appear on the screen for about
4 seconds.
00 : 00 : 00 SP
"L1" will appear on the display.
" " will appear on the screen for
about 4 seconds and "REC" will
appear on the display window.
INDEX
To stop recording
Press STOP to stop recording.
To stop recording temporarily
Press PAUSE/STEP to avoid recording unwanted
material. Press again to continue the recording.
Notes:
• The pause function will be released after 5 minutes to prevent
damage to the tape or the VCR. The VCR will change to the
STOP mode.
• You can select a recording channel in the recording pause
mode.
Auto Rewind feature
This VCR will automatically rewind the tape when the tape
has ended (except during OTR and timer recording). It will
also eject the tape.
LINE1
VCR DVD
INPUT SELECT
STOP
PAUSE/STEP
REC/OTR
SP/SLP
" " will appear on screen for about
4 seconds.
" " will appear on screen for
about 4 seconds.
12/22/2006 5:07:34 PM 12/22/2006 5:07:34 PM