Installing The Batteries - Toshiba SBX4250KN User Manual

Installing the batteries

Install the batteries (AAAx2), matching the polarity indicated inside the battery compartment of
the remote control.
1 Open the battery cover.
2 Insert batteries.
Make sure to match the polarity marks (+ / -) on the batteries to the marks indicated in the
battery compartment.
3 Replace the battery cover.
SBX4250KN_IB_V1_R13.indd 11
Never throw batteries in a fire. Doing so may cause the batteries to explode.
Do not mix different battery types or combine used batteries with new ones.
If the remote control does not operate correctly, or if the operating range is reduced,
replace both batteries with new ones.
If the batteries are dead or if you will not be using the remote control for a long
time, remove the batteries to prevent battery acid from leaking into the battery
compartment.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Replace only with the same type of battery or equivalent.
When discarding batteries, environmental problems must be considered and local
rules or laws governing the disposal of these batteries must be strictly followed.
(Sample Illustration) Remote control
- Opening the battery cover
(Sample Illustration) Remote control
- inserting the batteries
2012/6/26 14:21:45
11