Sony DSC-WX100 Cyber-shot User Manual page 50

Determine the scene and press the shutter button halfway, so that you can lock the focus, exposure
and white balance. Then, press the shutter button fully down and pan the camera.
Notes
3D images are played back as standard still images on this camera.
3D shooting is not suitable for the following situations:
When there is a large subject
Moving subjects
When the main subject is too close to the camera
Images with little contrast, such as the sky, a sandy beach, or lawn
3D images consist of a JPEG file and an MPO file. If either file is deleted on your PC, the camera
may not operate correctly.
If you cannot pan the camera across the entire subject within the given time, a gray area occurs in
the composite image. If this happens, move the camera faster to record a full 3D image.
Since several images are stitched together, the stitched part will not be recorded smoothly.
Under low light conditions, the images may be blurred. It is recommended that you shoot images in
bright outside light.
If the entire angle of view of the 3D shot and the angle of view when the AE/AF was locked are
extremely different in brightness, color or focus, the shot will not be successful. If this happens,
change the location of the AE/AF lock and try again.
3D shooting may be canceled in the following situations:
You pan the camera too quickly or too slowly.
There is too much camera shake.
Related Topic
Viewing 3D images on a 3D TV
MENU items not available in some REC modes
Copyright 2012 Sony Corporation
50
Back to top