TV Controls and Indicators
Item
1 Light sensor
(IR) Infrared
Receiver
2
(Picture
Off)/
(Timer) LED
3 1 (Standby)
LED
4 " (Power) LED Lights up in green when the TV is turned on.
5 "/1 (Power)
6 –
CH
+ Press to scan through channels. To scan quickly through channels, press and
7 –
2
+
8
t (Input)
9 HOME
28
Description
Senses room light level and adjusts the screen brightness accordingly. Do not
put anything over the sensor, doing so may affect its function.
Receives IR signal from the remote control.
Lights up in orange when the On Timer/Sleep Timer/Photo Frame is set. If
you set to On Timer, lights up in orange while the TV is also in standby mode.
Lights up in green when the Power Saving is set to Picture Off.
Lights up in red when the TV is in standby mode.
Press to turn on and off the TV.
hold down either CH –/+. In the menu screen, these buttons serve as up/down
buttons.
Press to adjust the volume. In the menu screen, these buttons serve as left/
right buttons.
Press to display the list of external inputs. Press repeatedly to toggle through
the inputs.
In the menu screen, this button serves as confirming the selection or setting.
Press to display menu with TV functions and settings (see "Using the Menus"
on page 47).