Sony HT-CT260 Operating Instructions Manual page 27

Pairing this system with
a Bluetooth device
manually
If you intend to connect a second and
following pieces of Bluetooth
equipment, manual pairing is necessary.
TV VOL TV CH
PAIRING
1
Place the Bluetooth device to be
connected to this system within
1 meter of the system.
INPUT
+/–
VOL
+/–
VOL +/–
(Bluetooth)
2
Push PAIRING on the remote
control or touch
on the Sound Bar for more than
two seconds.
3
Perform steps 3 to 6 in "Pairing
automatically" (page 25).
Notes
• "Passkey" may be called "Passcode," "PIN
code," "PIN number" or "Password," etc.,
depending on the device.
• The pairing standby status of the system is
canceled after about 5 minutes. If pairing is
not successful, redo the procedure from step
1.
• If you wish to pair with several Bluetooth
devices, perform the procedure from steps 1
to 3 individually for each Bluetooth device.
• If no pairing information is stored in the
system, the system automatically enters
pairing mode when "BT AU" is selected as
input. In this case, pairing mode is not
released automatically.
Listening to music with
the Bluetooth connection
The system supports SCMS-T content
protection. You can listen to a Bluetooth
device that supports SCMS-T content
protection.
Before starting music playback, check
the following:
• The Bluetooth function on the
Bluetooth device is on.
• The pairing procedure is completed on
both this system and Bluetooth device.
1
Press INPUT +/– to select "BT
AU" on this system.
(Bluetooth)
continued
27
US