Sony STR-DA1800ES Operating Instructions Manual page 16

1)
FOLDER +/–
Selects a folder.
1)
TUNING +/–
Scans a station.
2)
PARTY
Press SHIFT (V), then press PARTY to
operate the PARTY STREAMING function.
Hold down the button to start or close a PARTY
(page 79).
D.TUNING
Enters direct tuning mode.
1)2)
K TV CH +/–
Press TV (W), then press TV CH +/– to scan
for the preset TV channels.
1)2)
PRESET +/–
Selects preset stations or channels.
1)
L F1/F2
Press BD or DVD (D), then press F1 or F2 to
select the equipment.
• DVD/HDD COMBO
F1: HDD
F2: DVD disc, Blu-ray Disc
• DVD/VCR COMBO
F1: DVD disc, Blu-ray Disc
F2: VCR
PREVIEW (HDMI)
This is a "Preview for HDMI" button.
Turns on a live picture-in-picture preview of
HDMI inputs connected to this receiver.
Preview windows display only HDMI IN 1,
IN 2, IN 3, IN 4 inputs.
Press V/v to select each HDMI input preview,
then press to enter/confirm the selection.
(This feature is powered by Silicon Image
InstaPrevue™ technology)
Notes
• When watching HDMI IN, this function will
be available.
• Preview window display only for HDMI IN 1,
IN 2, IN 3, IN 4 input.
Tips
• This function does not work in the following
cases.
– HDMI device is not connected.
– Some unsupported HDMI video format is
inputted.
– Current input is not HDMI input.
– When GUI is On.
– Zone2 / OutB setting is Zone2.
– Fast View setting is Off.
• Depending on the playback video format, this
function may not work.
US
16
1)
GUIDE
Press TV (W), then press GUIDE to display the
on-screen program guide.
SLEEP
Press AMP (X), then press SLEEP to set the
receiver to turn off automatically at specified
time.
Each time you press SLEEP, the display
changes cyclically as follows:
0:30:00 t 1:00:00 t 1:30:00 t 2:00:00
t OFF
Tips
• To check the remaining time before the
receiver turns off, press SLEEP. The
remaining time appears on the display panel.
• The Sleep Timer will be canceled when you
perform the following.
– Press SLEEP again.
– Update the software of the receiver.
1)
M TOP MENU
Opens or closes the BD-ROM's or DVD's Top
Menu.
1)
POP UP/MENU
Opens or closes the BD-ROM's Pop-up Menu,
or the DVD's menu.
1)
TV INPUT
Press TV (W), then press TV INPUT or
select the input signal (TV input or video input).
1)
WIDE
Press TV (W), then press WIDE repeatedly to
select the wide picture mode.
1)
N MUTING
Turns off the sound temporarily. Press the
button again to restore the sound.
Press TV (W), then press MUTING to activate
the TV's muting function.
1)
O TV VOL +/–
Press TV (W), then press TV VOL +/– to adjust
the TV volume level.
MASTER VOL +/–
Adjusts the volume level of all speakers at the
same time.
P DISC SKIP/iPhone CTRL
Press to
– skip disc when using a multi-disc changer.
– enter iPod/iPhone control mode when using
iPod/iPhone.
1)
1)
to