Sony Handycam NEX-VG900E Handbook page 85


Notes
If the eye sensor does not work even though

your eye moves close to the viewfinder, the
screen will be displayed on the LCD screen,
even though [VF/Panel] is set to [Auto].
Display Setting
You can set the duration of displaying the
icons or indicators on the LCD screen.
 Auto
Displays for about 3 seconds. The rec
button on the LCD screen is displayed when
shooting.
On
Always displays. The rec button on the LCD
screen is not displayed when shooting.
Tips

The icons or indicators are displayed in the

following cases.
When you turn on your camcorder.

The LCD screen is touched (Except rec button

on LCD screen).
When you switch your camcorder to the

movie recording, photo recording, or
playback mode.
You can switch the display by pressing

DISPLAY.
REC Lamp (Recording lamp)
You can make the camera recording lamp
on the front of your camcorder not to turn
on.
 On
The camera recording lamp lights up.
Off
The camera recording lamp does not light up.
Shooting w/o Lens
Sets whether or not the recording can be
started when no lens is attached.
 Disable
The camcorder does not start shooting, and
informs you if the lens is attached incorrectly.
Enable
Allows you to use non-Sony E-mount lenses
and mount adaptors.
Remote Ctrl (Remote control)
 On
Select this when you use the supplied Wireless
Remote Commander (p. 112).
Off
Select this if you do not intend to use the
supplied Wireless Remote Commander.
Tips

Select [Off] when you want to prevent your

camcorder from responding to a command sent
by another remote control unit.
A. Shut Off (Auto shut off )
You can set your camcorder to turn off
automatically when you do not operate
your camcorder for more than about 5
minutes.
 On
The camcorder turns off automatically.
Off
The camcorder does not turn off
automatically.

Notes
The camcorder does not turn off automatically

when using the AC Adaptor.
GB