Shooting Photos - Sony Handycam NEX-VG900E Handbook

The LCD screen of your camcorder can display recording images across the entire screen (full pixel

display). However, this may cause slight trimming of the top, bottom, right and left edges of images when
played back on a TV which is not compatible with full pixel display. In this case, set [Guide Frame] to
[On] (p. 75), and record images using the outer frame displayed on the screen as a guide.
Data code during recording
The recording date, time and condition are recorded automatically on the memory card. They
are not displayed during recording. However, you can check them as [Data Code] during
playback. To display them, touch
 [Data Code]  a desired setting 

Shooting photos

(Movie): When recording a movie
(Photo): When recording a photo
MODE button

Press MODE to turn on the
The LCD screen display switches for photo recording mode.

Press PHOTO lightly to adjust the focus, then press it fully.
Focus indicator
The focus indicator shows the focusing status by lighting/flashing.
: Focus locked.
 lit
: The camcorder cannot focus on the subject automatically. Either recompose
 flashing
the shot or change the focus setting.
Tips

See page 97 on the recordable number of photos.

The IRIS, Shutter Speed, ISO and Exposure are set to automatic adjustment when PROGRAM AE is

pressed.
(MENU)  [Setup]  [
.
PHOTO
button
When
(Photo) lamp.
GB
0
( Playback Settings)]
Flashes  Lights up
disappears, the photo is recorded.