Zone Alarm - Eagle CUDA 350 S/MAP Installation And Operation Instructions Manual

To adjust and turn on the deep alarm:
1. Press
MENU
2. Press ↓ to
S
3. Press ↓ to
D
4. Press ↑ to
D
5. Use ↑ ↓ to change the first digit, then press → to the next digit. Re-
peat these steps until the desired depth has been input. Press
To switch to a different depth setting, open the Sonar Alarms menu
and repeat the instructions in steps 4 and 5 above.

Zone Alarm

The zone alarm is triggered when any echo passes inside the zone
alarm bar, shown on the right side of the screen.
To adjust and turn on the zone alarm:
1. Press
MENU
2. Press ↓ to
Z
Sonar Alarms menu with Adjust Zone selected (left). Adjust Zone
Alarm selection box with Upper selected (right).
3. To set upper boundary for the Zone Alarm, use ← → to select
then press ↑ ↓ to move the top of the bar to the desired depth.
| |↓ to
MENU A
|
A ENT
ONAR LARMS
A E
EEP LARM NABLED
and press
D
EEP EPTH
| |↓ to
MENU A
A E
ONE LARM NABLED
| .
ENT
LARMS
.
| .
ENT
.
ENT
| |↓ to
ENT
LARMS
| |↑ to
ENT
60
S A
ONAR LARMS
A Z A
DJUST ONE LARM
.
ENT
| .
ENT
| .
ENT
U
PPER
,