To Adjust And Turn On The Shallow Alarm; To Adjust And Turn On The Deep Alarm - Eagle FISHEASY 320C Installation And Operation Instructions Manual

The deep alarm works just the opposite. It sounds a warning tone if the
bottom depth goes deeper than the alarm's setting. Both depth alarms
work only off the digital bottom depth signals. No other targets will trip
these alarms. These alarms can be used at the same time or individually.
At left, Main Menu and Sonar Alarms command.

To adjust and turn on the shallow alarm:

1. Press
MENU
2. Press to access depth feature.
ENT
3. Press ↑ or ↓ until the depth is correct, then press
4. Press ↑ to
S
5. To turn off the alarm, press
| |
ENT EXIT EXIT
To switch to a different depth setting, open the Sonar Alarms menu and
repeat the instructions in step 3 above.

To adjust and turn on the deep alarm:

1. Press
MENU
2. Press ↓ to
D
3. Press ↑ or ↓ until the depth is correct, then press
4. Press ↑ to
D
At right, the Sonar Alarms menu.
| |↓ to
MENU S
A E
HALLOW LARM
.
| |↓ to
MENU S
A D
EEP LARM EPTH
A E
EEP LARM NABLED
|
A ENT
ONAR LARMS
| |
ENT EXIT
NABLED
|
MENU MENU
|
A ENT
ONAR LARMS
| .
ENT
| |
ENT EXIT
60
.
.
ENT
| .
EXIT
|↓ to
S A
ONAR
.
.
ENT
| .
EXIT
| |↑|
ENT
LARMS