Programme Labels (Analogue Mode Only); Av Preset; Manual Programme Preset; Only) - Sony Bravia KDL-S40A12U Operating Instructions Manual

Programme Labels (Analogue mode only)

AV Preset

Manual Programme Preset (Analogue mode only)
30
Assigns a channel name of your choice up to five letters or numbers. The name will be
displayed briefly on the screen when the channel is selected. (Names for channels are usually
taken automatically from Analogue Text (if available).)
1
Press OK to select "Programme L abels".
2
Press M/m to select the channel you want to name, then press OK.
3
Press M/m/</, to select the desired letter or number (" s" for a blank
space), then press OK.
If you input a wrong character
Press M/m/</, to select %/5 and press OK repeatedly until the wrong character is
selected. Then, press M/m/</, to select the correct character and press OK.
4
Repeat the procedure in step 3 until the name is complete.
5
Press M/m/</, to select "End ," t hen press OK.
Do the following options.
1
Press OK to select "AV Preset".
2
Press M/m to select the desired input source, then press OK.
3
Press OK. Then press M/m to select the desired option below, then
press OK.
Option
Label
Before selecting "Label"/"AFT"/"Audio Filter"/"Skip"/"ATT", press PROG +/- to select
the programme number with the channel. You cannot select a programme number that is set
to skip (page 32).
1
Press OK to select "M anual Programme Preset".
2
Press M/m to select one of the following options, then press OK.
Description
Assigns a name to any equipment connected to the side and rear
sockets. The name will be displayed briefly on the screen when the
equipment is selected.
Press M/m to select one of the following, then press OK.
AV1 (or AV2/AV3/AV4/PC/HDMI) VIDEO/DVD/CABLE/
GAME/CAM/SAT: Uses one of these preset labels.
Edit: Creates your own label. Follow steps 3 through 5 of
Programme Labels (page 30).
Skip:
Skips an input source that is not connected to any equipment when
you press M/m to select the input source.
After selecting this option, press OK.
Sound Offset:
Sets an independent volume level to each equipment connected to
the TV .
Press to select "Sound Offset", then press OK. Press M/m to
,
select the desired volume level.